builder

RDS and Sierra Custom Homes~Be Inspired at the BIA Parade of Homes



Sierra Custom Homes

Sierra Custom Homes

Are you ready to be inspired by the latest home design trends and materials? The BIA Parade of Homes is happening now at Evans Farm, located in Delaware County, OH.  Evans Farm is a walkable neighborhood, filled with paths, ponds, parks, and green spaces for family and friends to enjoy. This community is planned in the style of New Urbanism, where outdoor living is key and walking and biking are great ways to get around the community. 

 

So what can you expect to see in this year’s Parade? 

  • Wide open spaces are the name of the game in this year’s homes. Sight lines are key, as well as openness and room for entertaining. 

  • First floor masters, some complete with a laundry room attached, large master baths with free standing tubs and dual showerheads in expansive showers, and large walk-in closets are prevalent in these homes. Of course, you’ll still find 2ndfloor masters, too. 

  • Flex rooms create options for everyone to choose how to use the space. 

  • Bar rooms on the first floor or basements brings entertaining to a new level. Check out the Speakeasy room and the Wine room you’ll find in one of the homes. Basement bars with almost full kitchens, wine bars, beer taps, and more will have you ready to move in.

  • Speaking of basements, you’ll see everything imaginable for entertaining and hanging out with family and friends. So many innovative and fun ideas will be sure to give you decorating, building, or remodeling ideas. 

  • Expansive outdoor living are one of the main features of these homes. Covered and uncovered patios, a pool, retractable screens, sliding doors, large patio doors, outdoor kitchens, and wide and inviting front porches, complete with porch swings, will make you want to spend more time outside. You’ll even find a bocce ball court in one back yard and a pool in another.

  • Garages are at the back of the homes and serve as more than car storage. A mirrored door that reflects the pool, a bar, storage, room for 3-4 cars, and more make these worth a look. 

  • Of course, the interior designs are exceptional. Color, texture, materials, interesting décor, accent walls, and decorative tiles on floosr and walls will have you snapping photos, taking notes, and asking for details.

  • A couple of the homes feature a separate large living space above the garage. These are outfitted with everything needed (living room, kitchen, bath, bedroom, and storage) to use as a guest suite, a rentable apartment, or in-law suite. Yes, they are able to be rented for additional income and walkways allow access to street parking for your renters.

Of course, we don’t want you to miss Home #11. Our home design was built by Sierra Custom Homes and features a 50' long great room that opens to the gorgeous side porch veranda with retractable screens and overlooks the brick terrace. The outdoor living features a water fountain and living wall of plants designed by Everett Brelsford of Blendon Gardens, which can be viewed through 3 massive sliding doors, as well as a door from the master bedroom. Inside, the home features a vaulted ceiling, twelve-foot custom built kitchen cabinets, 3 shower heads in the over-sized master shower, a first floor master that opens to the patio, a butler’s pantry, and amazing attention to detail. 

We’re so proud to have been a part in the creation of this stunning home. This award winning home is worth your time to visit, as well as all of the other homes. Come see us at the parade or give us a call~614-430-0027. We’d love to design a home for you or your clients. 

 

Read more to get all of the details for this year’s BIA Parade of Homes.

 

Weather Issues and Your Home-What to do!

Weather issues rain

We watch the weather, talk about the weather, praise the weather, and curse the weather.  Weather is part of our daily lives and impacts what we do, how we dress, and where we travel. But do we really think about how the weather impacts our homes? When we design and build homes for our clients, we are cognizant of the finish materials we want to be used, the home designs and floor plans we create, and where the home is going to be built and how it will impact the design.  In our conversations with the builders we work with here at Residential Designed Solutions, these conversations are frequent and ever changing. We wanted to share some of our thoughts so that we can do what’s best for our clients.  We know we can’t control the weather, so what do we need to consider and what can be done to homes to help them be protected from weather-as much possible? Mother Nature is a powerful force!

Hail: Those pesky balls of ice can do a lot of damage to roofs, siding, and windows.  While we can’t stop all of the damage, there are things that can help minimize it. 

  • If you’re building in a hail-prone area, it might be a good idea to install hail-resistant roofing. A homebuyer might argue that insurance will pay for damages (which could raise their rates), but why not be proactive and install a roof that will stand up to hail?

  • Modified asphalt shingles, which have rubber-like qualities, protect from hail and wind and tend to be more affordable than shingles made from plastic, aluminum or copper. 

  • Savings from insurance companies may be available to those with hail-resistant shingles, providing savings in the long run for a more expensive roof.  Plus the upgraded materials can extend the life and wear and tear on the roof. 

  • Installing impact-resistant windows will lessen the impact of flying glass if hails breaks the window.  (See more about these windows below)

Wind: Wind is one of the most destructive elements for a home. Shingles can be pulled off, gutters pulled away from the roofline, windows broken, and doors blown in. Wind gusts can cause tree limbs to break and fall on homes, creating holes in the roof, leaks, and dislodged gutters. 

  • As builders and contractors, building a home that uses special connections, specialty clips and wraps to attach the roof to the home in areas that are prone to tornadoes and hurricanes is a must. 

  • Hip style roofs do not catch the wind as easily as a gable roof can, but again, what you build depends on the weather common to your area. 

  • Roof shingles, vertical siding, roofs, and window frames must have the construction materials properly installed to alleviate as much wind damage as possible.   

  • For clients that are really concerned, discuss building a one-story or low profile home, since these are less likely to experience wind damage. 

  • When building a home, look at the land. Are there trees close to the home that have the potential to fall on the home? Which ones can be removed? What is the landscaper planting near the home and if there are trees being planted, how tall do they get?

  • Installing impact-resistant windows can create peace of mind for clients, especially if they understand that while windows might shatter or crack when struck, the fragments will stay in place instead of being blown into the home. 

  • Consider installing doors that open outward. These doors are less likely to fail in a storm.

  • A cheap garage door might be just that in a windstorm. There are garage doors now available that have been tested for and constructed for wind resistance. If the doors are high profile, this might be worth investigating.

  • Roofers should use at least six nails or staples to hold each shingle and the nails need to be installed beneath the edges of the overlapping shingles. Homeowners may not know or inspect this, so we need to!  And was the waterproof underlayment installed beneath the shingles?

Rain: Water is a major cause of damage to a home. Water can find its way in through almost any surface material, so it is critical to plan for this and provide a drainage plane, so the water has an exit point. If not, the wet and dry process will cause materials to rot over a surprisingly short period of time. 

The other point of water entry to the home is through the basement walls. It is extremely important that the house be graded so that water drains away from the foundation and that any downspout or foundation drains either have a gravity exit or a pump with battery backup to ensure dry conditions below grade. 

  • A roof with an overhang design that extends the fascia board so that it creates a drip edge keeps rain from being driven across the surface of the soffit and into the eaves. 

  • If shingles happen to get blown off, having the seams taped with a self-adhering rubber or asphalt tape will create a solid obstruction against water. 

  • Properly installing and maintaining areas susceptible to water penetration is vitally important.

  • When installing flashing, caulk and roof cement look for areas of weakness. As the builder, inform your clients that areas sealed around the chimneys, skylights, and plumbing vents will dry out and erode over time, so they need to be inspected annually to prevent issues down the road. 

  • Understanding the soil’s condition where the home is built is another key to success in regards to preventing leaks in the foundation. 

Snow: There’s no way around this, especially here in Ohio. Snow is heavy and will fall. Knowing and understanding the building codes for roof design will prevent snow from collapsing roofs or causing sagging. 

Ice: Ice can cause significant damage to a home, but designing a roof to remain cold everywhere in the winter will help.  Heat escaping through an inadequately insulated roofing system causes snow and ice to melt even if the temperature is below freezing.  This water then refreezes when it reaches the uninsulated sub-freezing eaves, creating ice dams. Ice dams cause melted snow to back up under the roofing material finding the first tiny gap in the substrate and you quickly have water on your ceiling or worse.

  • This is a difficult fix, but find the hot spots and adjust the insulation levels and ventilation channels to even out the roof temperature. 

Sun: Knowing the materials needed to withstand the force of the sun are instrumental to the success of the build. The sun is a natural drying and aging occurrence both in our skin and our roofs.

  • Ridge vents and attic fans can be installed to help release excessively heated air and keep attic wood and roofing materials from aging prematurely. 

  • Painting homes’ exteriors with lighter colors keep air conditioners from working harder. Dark colored homes absorb more heat than light colors.  Another thought is to paint the home with a ceramic paint coating with ultra-violet ray reflectivity properties. 

  • Adding a UV-blocking film to windows will provide protection to homeowners, flooring, and their furniture. In some parts of the country the reflected heat from these reflective windows can actually melt the vinyl siding on a neighboring home so special care must be taken in making this selection.

  • Consider applying a coating to the roof to protect it from damage from the sun.  The coating should have a high emissivity and reflectivity rate. It helps to draw the heat of the sun away. 

  • Again, some of the responsibility falls on the homeowners to have regular inspections to catch cracked or curled shingles, or those that have faded or are missing. Regular inspections can save big headaches. 

We know we can’t control the weather, but we do have some control over how we build, what we use, and our desire to build the best possible home for our clients. Our due diligence can create homes that will withstand weather’s folly. Let our designers at RDS help you by creating homes for your clients for you to build or remodel.

 

Jim's Tip - Who Comes First, Builder or Designer?

RDS_blog_Who-Comes-First.jpg

I recently read an article in one of our trade publications written by a builder explaining in great detail why he insisted on being the initial contact with potential clients. He spent a good amount of column space demonstrating that his clients were best represented by working through his process to develop designs for their project. His belief was that only through a process such as his, would clients be able to have plans developed that would be able to be built with-in their budget.

Having worked as a residential designer both independently and in the employ of several builders, I certainly understand his perspective. It is very common for clients to come into our office with grand dreams, essentially with “champagne taste and a beer budget” as the saying goes. Someone must introduce some hard cold facts into the conversation very early so that realistic expectations are set before pen or mouse are in motion.

There is nothing worse than having a set of construction documents fully developed only to find out that the house is way over the client’s budget. A lot of money has been wasted including the builders’ time along with all his trade partners, bidding a useless set of plans. The point that the builder was emphasizing was that costs must be part of the discussion and controlled all the way through the design and construction process. I couldn’t agree more.

All our designers have construction management and hands on building experience which allows us to have a realistic cost perspective when initially meeting with clients. We always have a cost discussion before we get started so it really doesn’t matter who qualifies the client. The key is tracking costs at every step of the design process, from initial sketch “ballpark” pricing to final construction/contract documents.

The point that I want to convey is that it really doesn’t matter who comes first if both the builder and their designer are working closely together. The resulting home will be one that the clients are thrilled to own at a cost they are comfortable with. Contact RDS to see how seamlessly we can become part of your team.